PRODCUTS

KH-120ZA

KH-120ZA & KH-240ZA, are mixer amplifiers designed for up to 4 microphones plus 4 AUX line-in (AUX1~4), total 8 inputs application.
Each microphone input and line-in input has its own volume control. The microphone inputs are at the rear panel. Besides, there are 1 Master control of output volume, and 2 tone controls: Bass and Treble.
The output connection covers low impedance 8 ohm, and high level 70V and 100V or 5 zone and all zone select screw terminal.
Choose only one of these output connections to match the speaker. Furthermore, the amplifier also has one record output for the demand of recording. The equipment provides 2 Pre-output ( level 0dB ).
To ensure the amplifier safety, it has speaker short, over temperature, and over load protection.
Besides AC power source, our mixer amplifier also accept DC 24V input power source from the battery.
Furthermore, the amplifier also has Build in Digital Recorder Player.
Each microphone Build in echo. The microphone echo it has effect ( delay and repeat ) controls. (400~600ms delay time)
 
MODEL KH-120ZA KH-240ZA
POWER INPUT 220~240VAC 50/ 60Hz  
  24VDC  
OUTPUT 8    ohms/ 70V/ 100V  
FREQUENCY RESPONSE MIC: 77Hz~19KHz ±3dB  
  AUX: 74Hz~19KHz ±3dB  
RECORD OUTPUT 1V/ 100 ohms  
INPUT SENSITIVITY MIC: -64dB ±3dB  
  AUX: -30dB ±3dB  
INPUT IMPEDANCE MIC: -64dB ±3dB / 600ohms UNBALANCED  
  AUX: -30dB ±3dB/ 10KHz UNBALANCED  
TONE CONTROL BASS: ±12dB/ 100Hz  
  TREBLE: -13dB~ +11dB/ 10KHz  
S/N RATIO > - 85dB   ±3dB  
T.H.D. < 0.6% 1KHz RATED POWER  
RATED POWER(100V) 120W RMS 240W RMS
POWER CONSUMPTION 297VA 495VA
WEIGHT KP120ZA/ 11.2KGS   | KP-240ZA/ 13.4KGS  
DIMENSIONS 420W x 379D x 96H  mm  


← GO BACK